Integrate CO Detectors Into Your Home’s Security

Putting CO detectors in your home is a great beginning, but you can boost your defense even more by incorporating them into your security system. This offers an added layer of protection, as your monitoring agents will receive notification whenever a CO detector goes off. This support can prove to be vital, specially if an emergency takes place in the middle of the night and you don’t hear the alarm.

Get CO Detectors In Santa Fe With Your Home Security System

Protect your family against all sorts of threats with a full-featured home security system from Secure24 Alarm Systems. Our CO and smoke detectors in Santa Fe are monitored in the same fashion as your other security sensors. You’ll enjoy backup from an attentive, 24-hour team whenever a crises arises. Call (505) 317-7139 today to upgrade the defense of your home and family.

Property owners must defend against a variety of risks like burglary, fire, and flooding. But what about something that you aren’t able to smell or see? Carbon monoxide is different from other dangers because you may never know it’s there. Despite that, using CO detectors can easily shield your family and property. Learn more about this hazardous gas and where to place carbon monoxide detectors in your Santa Fe property.

What Is Carbon Monoxide?

Known as the silent killer as of a result of its absence of odor, color, and taste, carbon monoxide is a common gas produced by an incomplete combustion of fuels. Any appliance that consumes fuels like an oven or furnace can generate carbon monoxide. Although you normally won’t have problems, complications can arise when appliances are not regularly serviced or adequately vented. These mistakes may cause a proliferation of this dangerous gas in your residence. Generators and heating appliances are the most common reasons for CO poisoning.

When in contact with low levels of CO, you could suffer from dizziness, headaches, fatigue nausea, or vomiting. Extended exposure to high amounts may cause cardiorespiratory failure, coma, and death.

Tips On Where To Place Santa Fe Carbon Monoxide Detectors

If you don’t have at least one carbon monoxide detector in your home, buy one now. If possible, you ought to have one on each floor of your home, and that includes basements. Review these suggestions on where to place carbon monoxide detectors in Santa Fe:

• Put them on every floor, particularly where you use fuel-burning appliances, such as furnaces, fireplaces, gas dryers, and water heaters.
• You ought to always install one within 10 feet of sleeping areas. If you only get one carbon monoxide detector, this is where it should go.
• Place them approximately 10 to 20 feet away from potential CO sources.
• Avoid placing them immediately above or next to fuel-utilizing appliances, as a small amount of carbon monoxide might be emitted when they start and trigger a false alarm.
• Attach them to walls about five feet off the ground so they will sample air where inhabitants are breathing it.
• Avoid putting them in dead-air places and next to windows or doors.
• Install one in areas above garages.

Inspect your CO detectors often and maintain them per manufacturer recommendations. You will usually have to replace units in six years or less. You should also make certain any fuel-consuming appliances are in in optimal working order and have adequate ventilation.